Mix the paint thoroughly before painting and, if necessary, during painting. Mix a sufficient paint in the same container for the uniform surface to avoid any shade differences. Do test painting with the color of your choice to make sure the tone is correct. Please note that the correct shade of the paint is only visible when the surface dries. Take care of the painting environment and protect the surfaces with tape, paper, cardboard or protective plastic that remain untreated. If you paint decorative patterns or surfaces that use painter's tape, etc., we recommend a longer drying time before taping the surface and new painting. We recommend painting with a brush, mohairla or mohairla, depending on the material to be painted and the subject.

Painting conditions

The surface to be painted must be dry, less than 80 % of the relative humidity and at least +10 ° C. The painted surface is touching dry after about 6 hours and can be repainted after about 24 hours. The curing will continue for a month. Cool and dark slow down the drying of the paint. Avoid moving furniture and heavy objects by pulling on a painted surface.

Unpainted surface: Clean the surfaces of dust and dirt. Beat and smooth the holes and cracks as needed. Remove the sanding dust and clean the surface before painting. Wash the dirty surface with Uula painting according to the instructions and allow to dry properly before painting. Primer new wood surfaces with about 20% thinned wood floor paint. After priming, paint the surface 1-2 times. If necessary, thin the Uula with a general spirit.

Old paint: Clean the surfaces of dust and dirt. Remove the loose old paint with a scrap and sand the entire surface. Old, thick paint layers can be removed with an effective Uula paint remover. Rough shiny or hard surface with abrasive paper. Beat and smooth the holes and cracks as needed. Remove the sanding dust and clean the surface before painting. Wash the dirty surface with Uula paint as the instructions and allow to dry properly. Primer with 10% thinned Uula wooden floor paint thinly and allow to dry. After priming, paint the surface 1-2 times. Thin if necessary.

Glossary degrees:  semi -matt and semi -gloss.

Survivability: about 10-12 m ² /l depending on the roughness and porosity of the substrate.

Thinnenne: Uula General

Cleaning of tools: The tools are cleaned with Uula general spirit and finally washed with water and soap.

Storage & Prevention of Environmental Harp: Storage in a dry and cool place. Empty, dry packaging can be delivered for recycling. Liquid waste must be delivered to the hazardous waste collection point.

Follow the top (1 month) caution when handling painted surfaces. Always use soft, non -scratched cloths and mushrooms for cleaning. Use neutral detergents as detergents. Rinse the surfaces thoroughly. It is essential for oil paints that light shades may turn yellow in the dark. This is a good idea to consider when making shade choices.