Mix the Uula Sauna Culture thoroughly before painting and, if necessary, during painting. Mix a sufficient paint in the same container for the uniform surface to avoid any shade differences. Do test painting with the color of your choice to ensure that the shade is correct and to ensure the desired coverage. There may be differences in the shades of the wood's own shade, the shine, previous treatments and tinting and tinting. It is always a good idea to choose the color in the mode and lighting it comes to. Lighting affects color sighting. The right shade of the paint is only seen after the surface dries. Always paint with plenty of paint, as too dry a wolf can cause the unevenness of the painting and the degree of gloss. Spread Uula Sauna Culto board, panel or log at a time to avoid sequels. Take care of the painting environment and protect the surfaces with tape, paper, cardboard or protective plastic that remain untreated.

The method of application and the painting conditions

We recommend painting with a lacquer server, depending on the material and object to be painted. The surface to be painted must be dry, less than 80 % of the relative humidity and at least +10 ° C. The painted surface is contact dry after about 1/2 h and can be painted after about 2 hours. We recommend about a week of drying time for board surfaces before exposed to water. The product will reach the final durability one month after processing during which the board surfaces must be protected with board cloth during use.

Pre -treatment: Clean the surface to be treated with dust and dirt. Wash the dirty surface with Uula painting according to the product instructions and allow to dry properly before treatment.

Colorless treatment: Treat the surface with a colorless sauna bark 1-3 times. Make the intermediate sanding and remove the dust between the treatments.

Colored handling: Treat the surface with a colored sauna bark 1-2 times to cover the desired. To increase durability, you can apply 1-2 times the colorless Uula sauna.

Gloss degree: Dimply

Survey: planed /smooth surface 12-15 m ² /l.

Thinnen: water

Cleaning of tools: The tools are washed with water and soap immediately after the work is completed.

Storage & Prevention of Environmental Harp: Storage in a dry and cool place. The product may not freeze. Empty, dry packaging can be delivered for recycling. Liquid waste must be delivered to the hazardous waste collection point.

First, take care of the care of painted surfaces. Always use soft, non -scratched cloths and mushrooms for cleaning. Use neutral detergents as detergents. Rinse the surfaces thoroughly.