Uula Furniture Paint Painting Instructions
Uula Furniture Paint Painting Instructions for painting unpainted or previously painted surfaces. Uula furniture paints are suitable for wood, chipboard and fibreboard surfaces in dry interiors such as furniture, doors, window frames, lists and panels. Water -borne Uula furniture paint is comfortable to use because the paint is odorless, stays well in the brush and on the roller, the painted surface dries quickly to the touch dry and the finished result is achieved after a few hours. The furniture paint is also a great alternative to lime paint due to fast surface treatment, durability and easy repainting.
Uula Furniture Paint Painting Instructions
Mix the paint well before painting and also during painting. Mix a sufficient paint in the same container for the uniform surface to avoid any shade differences. Do test painting with the color of your choice to make sure the tone is correct. Please note that the right shade of the paint is only visible after the surface dries. Always paint with plenty of paint, as too dry a roll or wolf can cause the unevenness of the painting and the degree of gloss. Take care of the painting environment and protect the surfaces that remain untreated. If you paint decorative patterns or surfaces where you use painter's tape, etc. We recommend a longer drying time before re -painting and painting.
Painting conditions
We recommend a roll or brush depending on the material and object to be painted. The surface to be painted must be dry, less than 80 % of the relative humidity and at least +10 ° C. The painted surface is contact dry after about 1/2 h and can be painted after about 2 hours.
Pre -treatment & priming & topcoating
Unpainted surface: Clean the surface of dust. Wash the dirty surface with Uula painting according to the instructions and allow to dry properly before painting. Beat and smooth the holes and cracks as needed. Remove the sanding dust and clean the surface before painting. Primer new wooden surfaces with Uula primer. Paint with Uula with 2 times. If necessary, thin with water.
Old paint or varnish: Remove loose and scaly paint. If necessary, you can use efficient and safe Uula paint removal to remove old paint layers. Carhen shiny or hard paint or varnish with sandpaper. Wash the dirty surface with Uula paint as the instructions and allow to dry properly. Beat and smooth the holes and cracks as needed. Remove the sanding dust and clean the surface before painting. Paint with Uula with 2 times. If necessary, thin with water.
Additional information
Glossary degrees: semi -matt and semi -gloss
Survey: about 7 m 2 /l depending on the roughness and porosity of the substrate.
Thinnen: water
Cleaning of tools: The tools are washed with water and soap immediately after the work is completed.
Storage & Prevention of Environmental Harp: Storage in a dry and cool place. The product may not freeze. Empty, dry packaging can be delivered for recycling. Liquid waste must be delivered to the hazardous waste collection point. Recycling info .
First, take care of the care of painted surfaces. Always use soft, non -scratched cloths and mushrooms for cleaning. Use neutral detergents as detergents. Rinse the surfaces thoroughly.
