Mix the paint thoroughly before painting and, if necessary, during painting. Mix a sufficient paint in the same container for the uniform surface to avoid any shade differences. Check the shade before starting the painting by making a test painting for a board or similar.

Painting conditions

The surface to be treated must be dry (less than 15 %of wood moisture, less than 80 %of the relative humidity) and at least +5 ° C. The paint is touch dry after about ½ h. Clamped after about 6 hours. (+20 ° C and relative humidity <80 %). Do not paint in the rain, direct sunlight or sun -heated surface. We recommend painting with a brush. When using a high pressure sprayer, the spray mouth size is 0.5mm and the thinning with 0-10 water if necessary.

Pre -treatments

UNLAG SPACE: Clean the surface to be painted from any dust, dirt, mold, etc. Wash the dirty surface with Uula paint and the moldy surface with Uula mold cleaning . In the case of a very smooth new planet, sand the surface to the rough to ensure the adhesion. Remove any resin drains before painting. Grind a grayed/fluffy wood surface. When you paint as loose boards horizontally, you can thin the paint max. 15 % with water. Painting: Uula with an outsole paint. Allow to dry for at least 6 hours before the topcoat.

Top painting: according to the instructions for the selected paint type.

Survey: planed 8-12 m ² /l, sawdust 6-8 m ² /l.

Thinnen : water

Cleaning of tools: The tools are washed with water and soap immediately after the work is completed.

Storage & Prevention of Environmental Harp: Storage in a dry and cool place. The product does not withstand frost, freezing. Empty, dry packaging can be delivered for recycling. Liquid waste must be delivered to the hazardous waste collection point. Recycling info .

Please ensure the cleanliness of the painted exterior surfaces. It is a good idea to clean and protect the wood surface for the well -being and durability of the paint.