Uula primer painting instructions
- primer for inner surfaces
Uula primer painting instructions for unpainted or previously painted wood, plate, cardboard and rock surfaces in dry interiors. Fast -drying and adhesive primer is suitable for walls, ceilings, panels, doors, window frames, frames, moldings and furniture. The product is not suitable for flooring of the floors. The primer is not suitable for hearing paints and surface treatment agents.
The primer affects the absorption of topcoat, improves the adhesion of the top coat and facilitates the treatment of the top coat. Uula can be painted with Uula interior paint, Uula furniture paints and Uula Ovi and window paint. Uula primer is comfortable to use as the paint is odorless and the painted surface dries quickly for touch dry and re -painted. Uula primer can also be used as such for frosted topcoat.
Uula primer painting instructions
Mix the paint thoroughly before painting and, if necessary, during painting. Mix a sufficient paint in the same container for the uniform surface to avoid any shade differences. Do test painting with the color of your choice to make sure the tone is correct. Please note that the right shade of the paint is only visible after the surface dries. Take care of the painting environment and protect the surfaces with tape, paper, cardboard or protective plastic that remain untreated. To smooth the surface painted with Uula primer, all the Kits, Silot and Levels for the application can be used.
Painting conditions
We recommend painting with a roller or brush, depending on the material and object to be painted. The surface to be painted must be dry, less than 80 % of the relative humidity and at least +10 ° C. The painted surface is contact dry after about 1/2 h and can be painted after about 4 hours. Uula primer is also suitable for spray painting. In spray painting, the primer can be thinned with water if necessary. When priming porous surfaces, the paint can be thinned by about 15 % with water. Porous surfaces include, for example, porous wood fiber boards, cardboard plasterboard, pink cardboard, screed and concrete surfaces.
Pre -treatment & priming & topcoating
Pre -treatment: Clean the surface of dust. Wash the dirty surface with Uula painting according to the instructions and allow to dry properly before painting.
Primer: Beat and smooth the cavities and cracks as needed. Remove any sanding dust and clean the surface before painting. Primer new wooden surfaces with Uula primer .
Top painting: Paint the top coat of your choice according to the product's instructions.
Additional information
Survey: about 7 m 2 /l depending on the roughness and porosity of the substrate.
Thinne: water. When priming porous surfaces, about 15% of the paint can be thinned with water. Porous surfaces include: Cardboard plasterboard, porous wooden wooden boards, pink cardboard, and screed and concrete surfaces. Uula primer is also suitable for spray painting. In spray painting, the product can be thinned with water if necessary.
Cleaning of tools: The tools are washed with water and soap immediately after the work is completed.
Storage & Prevention of Environmental Harp: Storage in a dry and cool place. The product may not freeze. Empty, dry packaging can be delivered for recycling. Liquid waste must be delivered to the hazardous waste collection point.
First, take care of the care of painted surfaces. Always use soft, non -scratched cloths and mushrooms for cleaning. Use neutral detergents as detergents. Rinse the surfaces thoroughly.
