When selection of Roslag Mahong, the color of the surface to be treated must take into account the color of the surface, as the roughness of the surface, the wood, the previous color and the painting work significantly in the final color. The product reaches the final color when the surface is completely dried. Due to the color tones of the tar, there may be small shades in different batches. We recommend on the surface corresponding to a loose color scheme before starting painting.

Mix the roslag mahogany thoroughly before and during treatment. For a uniform surface, mix a sufficient batch in the same container to avoid any shade differences. Apply the paint with a brush or log at a time to avoid the sequels. Also treat the cross -sectional surfaces of the timber carefully. Do not treat in the rain or direct sunlight and do not treat the sun -heated surface.

Processing conditions

The surface to be treated must be dry, (wood moisture less than 15 %, relative humidity less than 80 %) and temperature at least +5 ° C. The drying time is about 3-4 weeks on shady surfaces. In sunlight, the surface can dry up to daily. Will take a normal rainfall after a few hours. A dense or new planed surface can significantly slow down the absorption and drying of the product. We recommend a brush for painting.

Pre -treatment: Wash the dirty surface with Uula paint , moldy surface with Uula mold washing . Remove the loose and poorly attached old wooden protection with a steel brush and scraper. Grind a grayed / fluffy wood surface to ensure adhesion.

New planed, log and lamella log
surfaces The fresh planed surfaces are smooth, dense and resin and have a new absorption capacity. Paint the planed surfaces only once in the first year. Make ready -made painting two years after first painting. Note that the final color will only appear after the finished painting.
Alternatively, the surfaces can be rolled by grinding (grinding of grinding paper 40-60), or they can be left to be praised with Uula Home protection for 1-2 years before painting.

Before painting a freezed surface, cleaning the surface to be painted and treating with Uula Home Protection are carried out. Since Uula Roslag's mahogany is to be consulted, no primer is used under it.

Handling Instructions: Brush Roslag's mahogany twice. The second treatment either immediately before the first has dried ("wet to wet") or after 1-2 years with pre -treatment. Maintenance should be done in the original or slightly darker shade. In maintenance paintings, you can mix the tinting base with a colored roslag mahogany of 1: 1 to reduce color coverage.

Survey: planet 8-10 m ² /l, sawdust 6-8 m ² /l.

Thinner: Uula Roslag's mahogany does not need to be thinned.

Cleaning of tools: The tools are cleaned with general spirit or lacquer gasoline and finally with water and soap.

Storage & Prevention of Environmental Harp: Storage in a dry and cool place. Keep out of reach of children. Not freezing. Empty, dry packaging can be delivered for recycling. Liquid waste must be delivered to the hazardous waste collection point. Recycling info .

Note: Dispose of oily traders, rags, etc. by burning or watering with water before throwing in the trash due to the risk of linseed oil self -emerging.

Please ensure the cleanliness of the painted exterior surfaces. It is a good idea to clean and protect the wood surface for the well -being and durability of the paint.