Skip to Main Content
Shopping Basket Close Cart

Uula Indoor Oil Painting Instructions

Uula Interior Oil paint painting instructions for primer wall painting for new and previously painted wood and rock surface walls and roofs indoors. The surface painted with indoor oil paint is extremely breathable, durable and covering. Uula indoor oil paint can also be used as a frosted surface.

Uula Indoor Oil Painting Instructions

Mix the paint thoroughly before painting and, if necessary, during painting. Mix a sufficient paint in the same container for the uniform surface to avoid any shade differences. Do test painting with the color of your choice to make sure the tone is correct. It is essential for oil paints that the light shades can turn yellow in the dark, so this is a good idea to take into account when making shade choices. Always choose the color tone in the lighting and the mode where it comes. Lighting and the gloss rate of the paint affect the color observation. Please note that the right shade of the paint is only visible after the surface dries. Take care of the painting environment and protect the surfaces with tape, paper, cardboard or protective plastic that remain untreated.

Painting conditions

We recommend painting with a brush or paint roller. The surface to be painted must be dry, less than 80 % of the relative humidity and at least +10 ° C. The painted surface is contact dry after about a day and can be repainted after about two days. Cool and dark slow down the drying of the paint.

Pre -treatment & priming

Pre -treatment: Remove the loose and scaly paint with scraper. Rough shiny and hard surface with sandpaper. Remove the grinding dust. Wash the dirty surface with Uula painting according to the instructions.

Painting instructions: Paint Uula with indoor oil 1-2 times, the second layer after the previous one dries if there is not enough coverage. If you paint particularly porous surfaces, such as wood fiber sheet, thin the paint with a thinner of the Uula Oil paint by 20-30%.

Additional information

Gloss degree: Dude.

Survey: about 6-8 m 2 /l depending on the roughness and porosity of the substrate.

Thinnenne: Uula General

Cleaning of tools: The tools are cleaned with Uula general spirit and finally washed with water and soap.

Storage & Prevention of Environmental Harp: Storage in a dry and cool place. Empty, dry packaging can be delivered for recycling. Liquid waste must be delivered to the hazardous waste collection point. Recycling info

Follow the top (1 month) caution when handling painted surfaces. Always use soft, non -scratched cloths and mushrooms for cleaning. Use neutral detergents as detergents. Rinse the surfaces thoroughly.