This is how you make the cooking paint yourself - see instruction

(50 l of paint)

Water 40 l
Iron sulfate 3 kg
rye or wheat flour 4 kg
red soil 8 kg
boiled linseed oil (in Verna) 3 l

Add the iron sulfate to hot water. Mix the rye flour slowly and cook the mixture until it is wooded. Add the red soil slowly, stirring well. Finally, add in the vern, after which the mixture is cooked for another 2-3 hours.

(50 l of paint)

Water 40 l
zinc sulfate 3 kg
rye or wheat flour 4 kg
yellow chocolate 12 kg
Boiled linseed oil (in Verna) 3 l

Add zinc sulfate to hot water. Mix the rye flour slowly and cook the mixture until it is wooded. Add yellow soil slowly, stirring well. Finally, add in the vern, after which the mixture is cooked for another 2-3 hours.

Of course, the factory is not responsible for the quality of homemade paints. If you are unsure, we recommend buying a finished paint.

Suitable brush, paintbrush or high pressure sprayer are suitable for applying the cooking paint. We recommend a brush or painting brush. The best painting weather is cloudy. The surface to be treated must be dry, less than 95 % of the relative humidity and the temperature on the plus side. Do not paint in the rain, direct sunlight or sun -heated surface. The substrate to be painted in the heat summer may be too dry, so you can moisten the wall the previous night with water.

Unpainted saw

Pre -treatment: Brush off dust. Wash the dirty surface with Uula paint cleaning, moldy surface with Uula mold washing according to the instructions and allow to dry for a few days. Grind a grayed/fluffy wood surface.

Primer with thinned cooking paint: If you want to priming the boards loose, then use 1: 1 UULA mold protection and paint the surface at the earliest after 24 hours with an unspoiled paint. If, for some reason, one painting has not been sufficiently covered, paint 30% with a thinned cooking paint. Painting: Paint one time with plenty of paint.

Previously painted sawdust

Pre -treatment: Brush off dust. Remove the loose old color from previously painted surfaces. If you change the color, remove the old color very carefully with, for example, water pressure washing and allow to dry well before painting. Wash the moldy surface with Uula mold washing according to the instructions and allow to dry properly. Treat the cleaned surface with Uula Home Protection. Painting: Paint one time with plenty of paint. If you paint two thick unspoiled paint layers, the paint surface may hatch.