Uula Soup Painting Instructions
- Red Earth Painting Instructions
Uula cooking instructions for painting exterior wood surfaces. The cooked paint, or more commonly, is suitable for new unpainted or old sawdays painted with previously painted paint. The cooking paint is suitable for new log and planing surfaces when painting is done according to a separate instruction. The cooking paint is not suitable for primed surface or surfaces, which have previously been treated with impregnating agents or oil, alkyd or similar paint.
Uula cooking instructions
Suitable brush, paintbrush or high pressure sprayer are suitable for applying the cooking paint. We recommend a brush or painting brush. The best painting weather is cloudy. The surface to be treated must be dry, less than 95 % of the relative humidity and the temperature on the plus side. Do not paint in the rain, direct sunlight or sun -heated surface. The substrate to be painted in the heat summer may be too dry, so you can moisten the wall the previous night with water.
Unpainted saw
Pre -treatment: Brush off dust. Wash the dirty surface with Uula paint cleaning , moldy surface with Uula mold washing according to the instructions and allow to dry for a few days. Grind a grayed/fluffy wood surface.
Priming with thinned cooking paint: As a rule, cooking paint does not require primer painting, but one unspoiled painting is enough. However, if you want to priming the boards loose, then use 1: 1 UULA Home protection with a thinned cooker and paint the surface at the earliest after 24 hours with an unspoiled paint. Painting: Paint one time with plenty of paint. If one painting has not been sufficiently covered, the surface can be painted by 30-50% with a thinned cooking paint.
Previously painted sawdust
Pre -treatment: Brush off dust. Remove the loose old color from previously painted surfaces. If you change the color, remove the old color very carefully with, for example, water pressure washing and allow to dry well before painting. Wash the moldy surface with Uula mold washing according to the instructions and allow to dry properly. Treat the cleaned surface with Uula Home Protection. Painting: Paint one time with plenty of paint. If you paint two thick unspoiled paint layers, the paint surface may hatch.
Instructions for painting new logs and planer surfaces
Option 1. The new log and planed surfaces can be painted immediately with a new 1: 1 Uula with a thinning paint with a thinning paint. On top of painting at the earliest after a year.
Option 2 . The new log and planer surfaces are roughened by sanding with sandpaper to the surface. The roughened surface is cleaned of grinding dust and treated with Uula Home Protection according to the instructions. Painting one time with plenty of paint.
Option 3. New log and planed surfaces are treated with Uula Home Protection. The surface is allowed to be allowed for 1-2 years, after which it is painted with plenty of time. The grayed or fluffy surface must be sanded and cleaned and pre -treated before painting . Protective treatment with Uula Home Protection at least one day before painting.
Maintenance and spray painting
Maintenance painting: Remove the loose old color from previously painted surfaces. If you change the color, remove all old cooking paint as well as possible, for example, with water pressure washing and allow to dry well before painting. Wash the dirty surface with Uula paint, moldy surface with Uula mold washing according to the instructions. Treat the surface to be painted with Uula Home Protection, according to the instructions. Paint one time with plenty of paint.
Spray Painting: Pregnancy according to the substrate to be painted. Thin the cooking paint about 30 % with Uula Home Protection. Note that the ground color pigments in the cooking paint may consume more than usual than usual. We do not recommend the use of a piston pump due to the consuming effect of coarse ingredients contained in ground color pigments. The mouth size of the syringe must be at least 0.4 mm. Painting once. We recommend smoothing the surface with a painting brush.
Other tips and things to consider
Book enough paint. We recommend choosing the same goal batch, as there may be differences in cooking paint and shades due to ground color pigments Mix the paint thoroughly before painting and, if necessary, during painting. Mix a sufficient paint in the same container for the uniform surface and paint at a time to avoid any shade differences. Do not use smooth nails (eg electrical zinc) to attach the boards, as the paint will not remain in them.
Do not paint two thick, unspoiled paint layers, as the paint surface may hatch.
If a light flurry appears after drying on the painted surface, it is the salts of the iron sulphate used to make cooking paint. Salts usually disappear spontaneously and are aesthetic disadvantage. The points can be cleaned with clean water using a soft brush.
The cooking paint may dissolve the iron sulfate -containing water from the rain surface, which can color the materials below the rust.
Additional information
Drying time: Touch dry after about 1-2 h (+20 ° C and relative humidity <80 %).
Likewise: 3-5 m 2 /l.
Thinner: The cooking paint does not normally need to be thinned. If necessary, the cooking paint can be thinned with 5-10 %with Uula Home protection.
Cleaning of tools: The tools are washed with water and soap immediately after the work is completed.
Storage: Storage in a dry and cool place (over +2 ° C). The cooking paint cannot withstand frost. Don't freeze. Shelf life in the open jar for 3-4 months and in an unopened jar for a few years.
Prevention of environmental damage: Empty, dry packaging can be delivered for recycling. Liquid waste must be delivered to the hazardous waste collection point. Recycling info
Please ensure the cleanliness of the painted exterior surfaces. It is a good idea to clean and protect the wood surface for the well -being and durability of the paint.
