Mix the opaque paint thoroughly before painting and, if necessary, during painting. For a uniform surface, mix a sufficient batch in the same container to avoid any shade differences. Do test painting with the color of your choice to make sure the tone is correct. Please note that the right shade of the paint is only visible after the surface dries. Take care of the painting environment and protect the surfaces with tape, paper, cardboard or protective plastic that remain untreated.

Uula Oil Business is colorless, but it can be tinted with the most common tones of the transformation. Always choose the color tone in the lighting and the mode where it comes. Lighting and the gloss rate of the paint affect the color observation. In audible treatments, the roughness of the surface, the type of wood, the previous color and the painting work significantly affect the final color. The product is suitable as such, uninspired for the alignment of old furniture and furniture lacquer surfaces, whereby the oil heater is rubbed with a lint-free fabric to the surface and allowed to dry for 4-5 hours.

Processing conditions

We recommend painting with a brush, a screed or a paintbrush, depending on the material to be painted and the subject. The surface to be painted must be dry, less than 80 % of the relative humidity and at least +10 ° C. The painted surface is contact dry after about 5-8 hours and can be re-painted after about 24 hours.

Pre -treatment: Clean the surface of dust and dirt. Wash the dirty surface with Uula paint cleaning and covered outdoor surfaces with Uula mold washing according to the instructions and allow to dry properly before treatment.

Colorless Treatment: Treat the untreated surface with a colorless oil spark 1-3 times and a previously processed surface 2-3 times. Make intermediate sanding and dust removal between treatments.

Colored Treatment: Treat the surface with tinted oil sparkle 1-2 times to achieve the desired masking capacity. In order to increase durability, you can apply a colorless oil spanking to the surface.

Glossary degrees: semi -matt.

Survey: planed 12-15m ² /liter. Saw surface 8-10m ² /liter, depending on the roughness and porosity of the substrate.

Thinnen:  Uula General Settlement .

Cleaning of tools: The tools are cleaned with Uula general spirit and finally washed with water and soap.

Storage & Prevention of Environmental Harp: Storage in a dry and cool place. Empty, dry packaging can be delivered for recycling. Liquid waste must be delivered to the hazardous waste collection point.

Follow the caution to treat treated surfaces. Always use soft, non -scratched cloths and mushrooms for cleaning. Use neutral detergents as detergents. Rinse the surfaces thoroughly.