Uula Mold Wash

Uula mold cleaning- for cleaning and maintenance of exterior surfaces

Uula mold washing is a biodegradable alkaline detergent for outdoor use. (mold, algae and mushroom growth). Uula mold cleaning is suitable for all kinds of naturally soaked and cleaning exterior surfaces and cleaning before painting. Applications include: Painted exterior wood surfaces, terraces, plastic and wooden outdoor furniture, gutters, etc.

Uula mold cleaning - dosage instructions & instructions for use

Dosage to water as follows:
mildly dirty surfaces: 1: 2
Very dirty surfaces: 1: 1

• Apply to the washing surface with sponge, washing cloth, brush or low pressure spray.
• Cleaning results for very dirty and stubborn surfaces can be improved by brushing.
• Allow to work for about 10 minutes and rinse with warm water.
• Allow the washed surfaces to dry well before painting.
• The cleaned surface can be treated with all types of paints and wood preservatives.

Mold mushrooms thrive in damp and warm, so the risk of mold increases in years when the autumn is long and rainy and the winter is warm. In a warm winter, the relative humidity of the air is significantly higher than in normal frost winter. In addition, the industrial drying of timber forcibly increases the risk of molding significantly, as well as felling trees during the wrong season.

The occurrence of molds and living conditions vary between adjacent houses and even different parts of the house. The eaves and open porches are more likely to mold with wall surfaces, as the evaporation of moisture due to less ventilation is slower. Different shrubs and trees around the house help mold.

As a natural material, wood is never uniform, but the amount of extracts in the wood and the frequency of mold spores vary in the same item or even on the same board. Mold growth The exterior surfaces of buildings have a natural phenomenon due to environmental conditions, which is not caused by the paint. Home grows on a wooden surface and does not destroy wood, so the disadvantage is mainly aesthetic. Mold can be removed by washing from the surface.